Flexible Clamp Sensor  

KEW 8135 

Flexible Clamp Sensor that is very useful for measuring low current around 5A

・Conductor size max.φ75mm
・Can measure AC current up to 50A
・Flexible and lightweight by the air core coil used at the sensor part
・Designed to meet the international safety standard IEC 61010-1
   CAT IV 300V, CAT III 600V

                                                  

 

 

Applicable model	5010, 5020, 6305(*), 6315(*)

* Please check the "Applicable model list" before using the product.

Conductor size	φ75 mm (max)
Rated current	AC 50A
Output voltage	AC 500mV/ AC 50A (10mV/A )
Accuracy	±1.0%rdg±0.5mV (45 – 65Hz) (0 – 50A) ±1.5%rdg±0.5mV (40 – 300Hz) (0 – 20A) ±1.5%rdg±0.5mV (300Hz – 1kHz) (0 – 5A)
Phase shift	within ±3.0° (45 – 65Hz) within ±4.0° (40Hz – 1kHz)
Cable length	Approx. 3m
Output connector	MINI DIN 6PIN
Output impedance	100Ω or less
Applicable standards	IEC 61010-1, IEC 61010-2-032 CAT IV 300V / CAT III 600V Pollution degree 2, IEC 61326
Operating temperature & humidity range	-10 to 50°C, Relative humidity 85% or less (no condensation)
Dimensions	65（Ｌ）×24（Ｗ）×22（Ｄ）mm
Weight	Approx. 170 g
Included Accessories	9095 (Carrying case) Instruction manual Cable marker